The chain of the motorcycle, the sprocket is the main transmission device of the motorcycle at the present stage. During the normal riding process, it will appear as the chain is elongated, the gear is sharpened, etc. When the chain and the sprocket are worn, it needs to be replaced in time. Otherwise, there will be drag chains, slips, and abnormal sounds.
A good quality chain is no less important for vehicles than qualified tires or even engines. As the key to linking the driving system and the power system, the chain is often ignored by many users. Let's talk to everyone about the chain today.
Motorcycles do have wear and tear. Domestic motorcycles can't be more than 13 years old. Normally, they are 100,000 kilometers in 10 years, so many manufacturers can't design them to make motorcycles ride for a lifetime. The speed of motorcycles is coming. The slower, the car is going out of trouble, the wear and tear is very bad, and many times people are old, need to be repaired, please pay attention: Rongji igniter
Motorcycle sprocket will cause various damages to the motorcycle sprocket due to manufacturing errors, poor assembly or under improper operating conditions (load, lubrication, etc.). Common forms of damage are: wear, surface fatigue, Plastic deformation, fracture, cavitation, electric erosion, etc., here mainly describes the vibration caused by gear wear.
The inspection of the motorcycle sprocket is indispensable. At the same time of replacing the chain, pay attention to the maintenance of the sprocket. If the sprocket wears out, it must be replaced in time, but if it is worn, the sprocket should be replaced. Many people always change the chain. In fact, after the sprocket is worn too much, it will damage the chain and cause motorcycle problems.
Since 1994, the company has been producing motorcycle sprocket. Now it is a high-tech enterprise integrating R&D, production and sales of sprocket, cushion body assembly, general mechanical stamping parts and automobile stamping parts.